User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
345
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the log for a DHCP server filter event:
DGS-3420-28SC:admin#config filter dhcp_server log enable
Command: config filter dhcp_server log enable
Success.
DGS-3420-28SC:admin#
33-3 config filter dhcp_server trap
Description
This command is used to enable or disable the trap for a DHCP server filter event.
Format
config filter dhcp_server trap [enable | disable]
Parameters
enable – Specifies to enable the trap for a DHCP server filter event.
disable – Specifies to disable the trap for a DHCP server filter event.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the trap for a DHCP server filter event:
DGS-3420-28SC:admin#config filter dhcp_server trap enable
Command: config filter dhcp_server trap enable
Success.
DGS-3420-28SC:admin#
33-4 show filter dhcp_server
Description
This command is used to display the DHCP server/client filter list created on the switch.