Installation guide

xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
42
Physical and Environmental
Internal Power Supply
DGS-3200-10 & DGS-3200-16: AC Input: 100 – 240 VAC, 50-60 Hz
DGS-3200-24: AC Input: 100 – 240 VAC, 50-60 Hz, with RPS 200
Optional Redundant
Power Supply
(DGS-3200-24 only)
One connector in back to install optional external RPS. When internal power fails,
the optional external RPS will take over all the power supply immediately and
automatically. Supported RPS model: DPS-200
SD Card
(DGS-3200-24 only)
 Supports file system.
 Save multiple images, configuration files, and logs to SD card.
 Boot Switch up with firmware and configuration files stored on SD card.
Fans
DGS-3200-10: No fan.
DGS-3200-16: One smart fan (default off).
DGS-3200-24: Two smart fans (default low speed).
Power Consumption
DGS-3200-10: 20.9 Watts (Max.)
DGS-3200-16: 28.9 Watts (Max.)
DGS-3200-24: 41.9 Watts (Max.)
Operating Temperature
DGS-3200-10: 0 - 40°C
DGS-3200-16 & DGS-3200-24: 0 - 50°C
Storage Temperature
-40 - 70°C
Humidity
5 - 95% non-condensing
Dimensions
DGS-3200-10 & DGS-3200-16: 280mm (W) x 180mm (D) x 43mm (H)
DGS-3200-24: 440mm (W) x 210mm (D) x 44mm (H)
Weight
DGS-3200-10: 1.69kg
DGS-3200-16: 1.86kg
DGS-3200-24: 2.43kg
EMI
CE Class A, FCC Class A, VCCI Class A, C-Tick Report
Safety
UL, CB Report
Performance
Transmission Method
Store-and-forward
Packet Buffer
DGS-3200-10: 128K Byte (1M bit) per device
DGS-3200-16 & DGS-3200-24: 786K Byte (6M bit) per device
Packet Filtering /
Forwarding Rate
Full-wire speed for all connections
1,488,095 pps per port (for 1000Mbps)
MAC Address Learning
Automatic update.
DGS-3200-10: Supports 8K MAC address
DGS-3200-16 & DGS-3200-24: Supports 16K MAC address
Priority Queues
8 Priority Queues per port
Forwarding Table Age
Time
Max age: 10-875 seconds, Default = 300