Installation guide

xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
34
Figure 4- 2. Initial screen, first time connecting to the Switch
Press Enter in both the Username and Password fields. Then access will be given to enter commands after the c ommand prompt
DGS-3200-10:4#.
There is no initial username or password. Leave the Username and Password fields blank.
NOTE: The first user automatically gets Administrator level privileges. At least one Admin-level
user account must be created for the Switch.
Password Protection
The switches do not have a d efault user name and password. One of the first tasks when settings up the Switch is to create user
accounts. Logging i n usi ng a pre defined administrator-level user nam e will gi ve the user privileged access to the Switch's
management software.
After the initial login, define new passwords for both default user names to prevent unauthorized access to the Switch, and record
the passwords for future reference.
To create an administrator-level account for the Switch, do the following:
1. At the CLI login prompt, enter create account admin followed by the <user name> and press the Enter key.
2. The S witch will then prompt t he user to provide a password. Ty pe the <password> used fo r th e admin istrator
account being created and press the Enter key.
3. Once entered, the Switch will ag ain ask the u ser to en ter the same password again to verify it. Typ e the same
password and press the Enter key.
4. A “Success” response by the Switch will verify the creation of the new administrator.
NOTE: Passwords are case sensitive. User names and passwords can be up
to 15 characters in length.