Installation guide

xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
27
External Redundant Power System
The DPS-200 is a redundant power-supply unit designed to conform to the voltage requirements of the switches being supported.
The DPS-200 can be installed into a DPS-900, or DPS-800 rack mount unit.
CAUTION: The AC power cord for the Switch should be disconnected before proceeding
with installation of the DPS-200.
DPS-900
The DPS-900 is a standard-size rack mount (5 standard units in height) designed to hold up to eight DPS-200 redundant power
supplies.
Figure 2- 18. Inserting the DPS-200 into the DPS-900
The RPS can be mounted in a standard 19" rack. Use the following diagram to guide you.
Figure 2- 19. Installing the DPS-900 into the equipment rack