Installation guide

xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
17
Rear Panel Description
The rear panel contains an AC power connector.
Figure 1- 7. Rear panel view of DGS-3200-10
Figure 1- 8. Rear panel view of DGS-3200-16
AC LINE
100-240 VAC
50-60 Hz
1.0A MAX
AC LINE
100-240 VAC
50-60 Hz
1.0A MAX
Redundant Power SupplyRedundant Power Supply
Figure 1- 9. Rear panel view of DGS-3200-24
The AC power connector is a stand ard three-pronged connector that supports the power cord. Plug-in the female connector of the
provided power cord into this socket, and the male side of the cord into a power outlet. The DGS-3200-10 and the DGS-3200-16
automatically adjust their power setting to any supply voltage in the range from 100 ~ 240 VAC at 50 ~ 60 Hz. The DSG-3200-24
automatically adjusts its power setting to any supply voltage in the range from 100 ~ 240 VAC at 60 Hz. In addition, an optional
external Redundant Power Supply (DPS-200) can be plugged into the connector displayed above. When the internal power fails,
this optional external RPS will take over all the power immediately and automatically.