Installation guide

xStack

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch

Ports

 Eight (DGS-3200-10) or 14 (DGS-3200-16) or 20 (DGS-3200-24) 10BASE-T/100BASE-TX/1000BASE-T Gigabit ports

 Two (DGS-3200-10 and DGS-3200-16) or four (DGS-3200-24) SFP Combo Ports (both 100FX and 1000BASE-X)

 Two (DGS-3200-10 and DGS-3200-16) or four (DGS-3200-24) 1000Mbps Copper Combo Ports (10BASE-T/100BASE-

TX/1000BASE-T)

 One RS-232 DB-9 console port (DGS-3200-10 and DGS-3200-16) or one combo console with an RS-232 DB-9 console port

and an RJ-45 (DGS-3200-24) connector. The combo console ports have two kinds of connectors, one is a female DCE

RS-232 DB-9 console connector and the other is a RJ-45 console connector that is Cisco compatible. The RS-232 DB-9

console has the higher priority. The RJ-45 console port can just read information but not write when the RS-232 DB-9 and the

RJ-45 are simultaneously connected to the device.

NOTE: For customers interested in D-View, D-Link Corporation's proprietary SNMP

management software, go to the D-Link Website and download the software and manual.