Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
5
DGS3048#
clear clear
config config
create create
crypto Cryptographic commands
debug-mode Exit from the EXEC to debug mode
delete delete
dir display all commands.
disable disable
download download
enable enable
login log in a user to the switch's console.
logout log out a user from the switch's console.
ping test the connectivity between network devices.
reboot restart the switch.
reset reset the switch to the factory default settings.
save save changes in the switch's configuration to
non-volatile ram.
show show
upload upload the current switch settings or the switch
history log to a tftp server.
DGS3048#
Figure 2-2. The ? Command
The dir command has the same function as the ? command.
When you enter a command without its required parameters, the CLI will prompt you with a Next possible
completions: message.
DGS3048# show
Command: show
802.1p 80.21p
802.1x 802.1x information
account display user accounts.
arpentry Display the current contents of the Switch's ARP tabl
authen authen
authen_enable display the method list of authentication methods for
promoting normal user level privileges to
administrator level privileges on the switch.
authen_login display a previously configured user defined method
list of authentication methods for users logging on t
the switch.
command_history display the command history.
configuration configuration
cpu cpu
crypto Cryptographic commands