Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
55
DGS3048#show packet ports 7
Command: show packet ports 7
Port number : 7 A B
Frame Size Frame Counts Frames/sec Frame Type Total Total/sec
------------ ------------ ---------- ---------- ------- ---------
64 3275 10 RX Bytes 408973 1657
65-127 755 10 RX Frames 4395 19
128-255 316 1
256-511 145 0 TX Bytes 7918 178
512-1023 15 0 TX Frames 111 2
1024-1518 0 0
C
Unicast RX 152 1
Multicast RX 557 2
Broadcast RX 3686 16
More: <space>, Quit: q, One line: <return>
show error ports
Purpose Used to display the error statistics for a range of ports.
Syntax
show error ports <portlist>
Description This command will display all of the packet error statistics collected
and logged by the Switch for a given port list.
Parameters
<portlist> − Specifies a port or range of ports to be displayed.
Restrictions None.
Example usage:
To display the errors of the port 3:
DGS3048#show errors port 3
Command: show errors port 3
Port number : 7
Error Type RX Frames TX Frames
--------------- --------------- ----------------
CRC Error 0 Excessive Deferral 0
Undersize 0 CRC Error 0
Oversize 0 Late Collision 0
Fragment 0 Excessive Collision 0
Jabber 0 Single Collision 0
Drop Pkts 0 Collision 0
More: <space>, Quit: q, One line: <return>