Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
34
delete snmp view
Purpose Used to remove an SNMP view entry previously created on the
Switch.
Syntax
delete snmp view <view_name 30> [all | <oid>]
Description
The delete snmp view command is used to remove an SNMP view
previously created on the Switch.
Parameters
<view_name 30> − An alphanumeric string of up to 30 characters
that identifies the SNMP view to be deleted.
all − Specifies that all of the SNMP views on the Switch will be
deleted.
<oid> − The object ID that identifies an object tree (MIB tree) that will
be deleted from the Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete a previously configured SNMP view from the Switch:
DGS3048#delete snmp view dlinkview all
Command: delete snmp view dlinkview all
Success.
DGS3048#
show snmp view
Purpose Used to display an SNMP view previously created on the Switch.
Syntax
show snmp view {<view_name 30>}
Description
The show snmp view command displays an SNMP view previously
created on the Switch.
Parameters
<view_name 30> − An alphanumeric string of up to 30 characters
that identifies the SNMP view that will be displayed.
Restrictions None.
Example usage:
To display SNMP view configuration: