Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
33
Example usage:
To display the SNMP users currently configured on the Switch:
DGS3048#show snmp user
Command: show snmp user
Username Group Name SNMP Version Auth-Protocol PrivProtocol
--------------- --------------- ------------ ------------- ------------
initial initial V3 None None
Total Entries: 1
DGS3048#
create snmp view
Purpose Used to assign views to community strings to limit which MIB objects
and SNMP manager can access.
Syntax
create snmp view <view_name 30> <oid> view_type [included |
excluded]
Description The create snmp view command assigns views to community strings
to limit which MIB objects an SNMP manager can access.
Parameters
<view_name 30> − An alphanumeric string of up to 30 characters
that identifies the SNMP view that will be created.
<oid> − The object ID that identifies an object tree (MIB tree) that will
be included or excluded from access by an SNMP manager.
included − Include this object in the list of objects that an SNMP
manager can access.
excluded − Exclude this object from the list of objects that an SNMP
manager can access.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create an SNMP view:
DGS3048#create snmp view dlinkview 1.3.6 view_type included
Command: create snmp view dlinkview 1.3.6 view_type included
Success.
DGS3048#