Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
30
Command Parameters
<view_name 30> | write_view <view_name 30>}
delete snmp group <groupname 30>
show snmp groups
create snmp host <ipaddr> [v1<community_string 20> | v2c<community_string
20> | v3 [noauth_nopriv | auth_nopriv | auth_priv]<auth_string
24>
delete snmp host <ipaddr>
show snmp host {<ipaddr>}
create trusted_host <ipaddr>
delete trusted_host <ipaddr>
show trusted_host <ipaddr>
enable snmp traps
disable snmp traps
enable snmp
authenticate traps
disable snmp
authenticate traps
show snmp traps
config snmp
system_contact
<sw_contact>
config snmp
system_location
<sw_location>
config snmp
system_name
<sw_name>
Each command is listed, in detail, in the following sections.