Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
25
5
SWITCH PORT COMMANDS
The switch port commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command Parameters
config ports [<portlist> | all] {speed [auto | 10_half | 10_full | 100_half |
100_full | 1000_full {[master | slave]}] | flow_control [enable |
disable] | learning [enable | disable] | state [enable |
disable]}
show ports {<portlist>}
config ports description <portlist> <string 1-64>
delete ports description <portlist>
show ports description {<portlist>}
Each command is listed, in detail, in the following sections.