Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
19
save
Purpose Used to save changes in the Switch’s configuration to non-volatile
RAM.
Syntax
save
Description This command is used to enter the current switch configuration into
non-volatile RAM. The saved switch configuration will be loaded into
the Switch’s memory each time the Switch is restarted.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To save the Switch’s current configuration to non-volatile RAM:
DGS3048#save
Command: save
Saving all configurations to NV-RAM... Done.
DGS3048#
reboot
Purpose Used to restart the Switch.
Syntax
reboot
Description This command is used to restart the Switch.
Parameters None.
Restrictions None.
Example usage:
To restart the Switch:
DGS3048# reboot
Command: reboot
Are you sure want to proceed with the system reboot? (y/n)