Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
18
enable web
Purpose Used to enable the HTTP-based management software on the
Switch.
Syntax
enable web <tcp_port_number 1-65535>
Description This command is used to enable the Web-based management
software on the Switch. The user can specify the TCP port number
the Switch will use to listen for Telnet requests.
Parameters
<tcp_port_number 1-65535> − The TCP port number. TCP ports
are numbered between 1 and 65535. The “well-known” port for the
Web-based management software is 80.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable HTTP and configure port number:
DGS3048# enable web 80
Command: enable web 80
Success.
DGS3048#
disable web
Purpose Used to disable the HTTP-based management software on the
Switch.
Syntax
disable web
Description This command disables the Web-based management software on
the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable HTTP:
DGS3048# disable web
Command: disable web
Success.
DGS3048#