Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
161
config dst
e_time - Configure the time of day to end DST.
• <end_time hh:mm> - Time is expressed using a 24-hour clock, in
hours and minutes.
s_date - Configure the specific date (day of the month) to begin DST.
• <start_date 1-31> - The start date is expressed numerically.
e_date - Configure the specific date (day of the month) to begin DST.
• <end_date 1-31> - The end date is expressed numerically.
offset [30 | 60 | 90 | 120] - Indicates number of minutes to add or to subtract
during the summertime. The possible offset times are 30, 60, 90, 120. The
default value is 60.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure daylight savings time on the Switch:
DGS3048# config dst repeating s_week 2 s_day tue s_mth 4 s_time
15:00 e_week 2 e_day wed e_mth 10 e_time 15:30 offset 30
Command: config dst repeating s_week 2 s_day tue s_mth 4 s_time
15:00 e_week 2 e_day wed e_mth 10 e_time 15:30 offset 30
Success.
DGS3048#
show time
Purpose Used to display the current time settings and status.
Syntax
show time
Description This will display system time and date configuration as well as display
current system time.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To show the time settings: