Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
159
config time
Purpose Used to manually configure system time and date settings.
Syntax
config time date <date ddmthyyyy> <time hh:mm:ss>
Description This will configure the system time and date settings. These will be
overridden if SNTP is configured and enabled.
Parameters date – Express the date using two numerical characters for the day of the
month, three alphabetical characters for the name of the month, and four
numerical characters for the year. For example: 03aug2003.
time – Express the system time using the format hh:mm:ss, that is, two
numerical characters each for the hour using a 24-hour clock, the minute
and second. For example: 19:42:30.
Restrictions Only administrator-level users can issue this command. Manually
configured system time and date settings are overridden if SNTP support is
enabled.
Example usage:
To manually set system time and date settings:
DGS3048#config time 30062003 16:30:30
Command: config time 30062003 16:30:30
Success.
DGS3048#
config time_zone
Purpose Used to determine the time zone used in order to adjust the system clock.
Syntax
config time_zone {operator [+ | -] | hour <gmt_hour 0-13> | min
<minute 0-59>}
Description This will adjust system clock settings according to the time zone. Time zone
settings will adjust SNTP information accordingly.
Parameters operator – Choose to add (+) or subtract (-) time to adjust for time zone
relative to GMT.
hour – Select the number hours offset from GMT (Greenwich Mean Time).
min – Select the number of minutes difference added or subtracted to
adjust the time zone.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure time zone settings:
DGS3048#config time_zone operator + hour 2 min 30
Command: config time_zone operator + hour 2 min 30
Success.