Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
11
4
BASIC SWITCH COMMANDS
The basic switch commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command Parameters
create account [admin | user] <username 15>
config account <username 15>
show account
delete account <username 15>
show session
show switch
show serial_port
config serial_port {baud_rate [9600 | 19200 | 38400 | 115200] auto_logout [never |
2_minutes | 5_minutes| 10_minutes | 15_minutes]}
enable clipaging
disable clipaging
enable web <tcp_port_number 1-65535>
disable web
save
reboot
reset
login
logout
ping <ipaddr> {times <value 1-255>} {timeout <sec 1-99>}
show CPU Utilization
show configuration
enable jumbo_frame
disable jumbo_frame
show jumbo_frame