Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
140
config admin local_enable
alphanumeric string of no more than 15 characters, and finally
prompted to enter the new password again to confirm. See the
example below.
Restrictions Only users who have the authentication password can issue this
command.
Example usage:
To configure the password for the “local_enable” authentication method.
DGS3048#config admin local_enable
Command: config admin local_enable
Enter the old password: ******
Enter the case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DGS3048#