Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
139
IP Address Protocol Port Timeout Retransmit Key
--------------- -------- ----- ------- --------------- --------
10.53.13.94 TACACS+ 49 5 no use --------
Total Entries : 1
DGS3048#
local_enable admin
Purpose Used to promote user level privileges to administrator level privileges
Syntax
local_enable admin
Description This command is for users who have logged on to the Switch on the
normal user level, to become promoted to the administrator level.
After logging on to the Switch users, will have only user level
privileges. To gain access to administrator level privileges, the user
will enter this command and will have to enter an authentication
password. Possible authentication methods for this function include
TACACS+/RADIUS, user defined server groups, local enable (local
account on the Switch), or no authentication (none). Because
TACACS+ and RADIUS do not support the enable function, the user
must create a special account on the server host which has the
username “enable”, and a password configured by the administrator
that will support the “enable” function. This function becomes
inoperable when the authentication policy is disabled.
Parameters None.
Restrictions Only users who have the authentication password can issue this
command.
Example usage:
To enable administrator privileges on the Switch:
DGS3048#local_enable admin
Password: ******
DGS3048#
config admin local_enable
Purpose Used to configure the local enable password for administrator level
privileges.
Syntax
config admin local_enable <password 15>
Description This command will configure the locally enabled password for the
local_enable admin command. When a user chooses the
“local_enable” method to promote user level privileges to
administrator privileges, he or she will be prompted to enter the
password configured here, that is set locally on the Switch.
Parameters <password 15> - After entering this command, the user will be
prompted to enter the old password, then a new password in an