Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
134
DGS3048#
config authen application
Purpose Used to configure various applications on the Switch for
authentication using a previously configured method list.
Syntax
config authen application {console | telnet | ssh | all] [login |
enable] [default | method_list_name <string 12>]
Description This command is used to configure switch configuration applications
(console, telnet, ssh, web) for login at the user level and at the
administration level (authen_enable) utilizing a previously configured
method list.
Parameters application – Choose the application to configure. The user may
choose one of the following four applications to configure.
 console – Choose this parameter to configure the
command line interface login method.
 telnet – Choose this parameter to configure the telnet login
method.
 ssh - Choose this parameter to configure the SSH (Secure
Shell) login method.
 http – Choose this parameter to configure the web interface
login method.
 all – Choose this parameter to configure all applications
(console, telnet, web, ssh) login method.
login – Use this parameter to configure an application for normal
login on the user level, using a previously configured method list.
enable - Use this parameter to configure an application for
upgrading a normal user level to administrator privileges, using a
previously configured method list.
default – Use this parameter to configure an application for user
authentication using the default method list.
method_list_name <string 12> – Use this parameter to configure an
application for user authentication using a previously configured
method list. Enter a alphanumeric string of up to 15 characters to
define a previously configured method list.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the default method list for the web interface:
DGS3048#config authen application http login default
Command: config authen application http login default
Success.
DGS3048#