Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
107
show ipif
Purpose Used to display the configuration of an IP interface on the Switch.
Syntax
show ipif {system}
Description This command will display the configuration of an IP interface on the
Switch.
Parameters <system> - Enter the name of the IP interface for which to view the settings.
(Always System)
Restrictions None.
Example usage:
To display IP interface settings.
DGS3048#show ipif System
Command: show ipif System
IP Interface Settings
Interface Name : System
IP Address : 10.48.74.122 (MANUAL)
Subnet Mask : 255.0.0.0
VLAN Name : default
Admin. State : Disabled
Link Status : Link UP
Member Ports : 1-24
DGS3048#