Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
7
DGS3048# the
clear clear
config config
create create
crypto Cryptographic commands
debug-mode Exit from the EXEC to debug mode
delete delete
dir display all commands.
disable disable
download download
enable enable
login log in a user to the switch's console.
logout log out a user from the switch's console.
ping test the connectivity between network devices.
reboot restart the switch.
reset reset the switch to the factory default settings.
save save changes in the switch's configuration to
non-volatile ram.
show show
upload upload the current switch settings or the switch
history log to a tftp server.
DGS3048# the
Figure 2-5. The Next Available Commands Prompt
The top-level commands consist of commands such as show or config. Most of these commands require one or
more parameters to narrow the top-level command. This is equivalent to show what? or config what? Where the
what? is the next parameter.
For example, if you enter the show command with no additional parameters, the CLI will then display all of the
possible next parameters.
DGS3048# show
Command: show
802.1p 80.21p
802.1x 802.1x information
account display user accounts.
arpentry Display the current contents of the Switch's ARP table.
authen authen
authen_enable display the method list of authentication methods for
promoting normal user level privileges to