Systems Switch User Manual

DGS-3024 Gigabit Ethernet Switch Manual
Static VLAN Entry
In the Configuration folder, open the VLANs folder and click the Static VLAN Entry link to open the following window:
Figure 7- 35. 802.1Q Static VLANs window
The first 802.1Q Static VLANs window lists all previously configured VLANs by VLAN ID and VLAN Name. To delete an
existing 802.1Q VLAN, click the corresponding
button under the Delete heading.
To create a new 802.1Q VLAN, click the Add button in the first 802.1Q Static VLANs window. A new window will appear, as
shown below, to configure the port settings and to assign a unique name and number to the new VLAN. See the table below for a
description of the parameters in the new window.
Figure 7- 36. 802.1Q Static VLANs window (Add)
To return to the first 802.1Q Static VLANs window, click the Show All Static VLAN Entries
link. To change an existing 802.1Q
VLAN entry, click the Modify button of the corresponding entry you wish to modify. A new window will appear to configure the
port settings and to assign a unique name and number to the new VLAN. See the table below for a description of the parameters
in the new window.
58