Systems Switch User Manual

DGS-3024 Gigabit Ethernet Switch Manual
Forwarding & Filtering
Unicast Forwarding
Open the Forwarding folder in the Configuration menu and click on the Unicast Forwarding link. This will open the Setup
Static Unicast Forwarding Table window, as shown below:
Figure 7- 28. Setup Static Unicast Forwarding Table window
To add or edit an entry, define the following parameters and then click Add/Modify:
Parameter Description
VID (VLAN ID)
The VLAN ID number of the VLAN on which the above Unicast MAC address resides.
MAC Address
The MAC address to which packets will be statically forwarded. This must be a unicast MAC
address.
Allowed to go port
Allows the selection of the port number on which the MAC address entered above resides.
Click Apply to implement the changes made. To delete an entry in the Static Unicast Forwarding Table, click the corresponding
under the Delete heading.
Multicast Forwarding
The following window describes how to set up Multicast Forwarding on the Switch. Open the Forwarding folder and click on
the Multicast Forwarding link to see the entry window below:
Figure 7- 29. Static Multicast Forwarding Settings window
The Static Multicast Forwarding Settings window displays all of the entries made into the Switch's static multicast forwarding
table. Click the Add button to open the Setup Static Multicast Forwarding Table window, as shown below:
51