Systems Switch User Manual

DGS-3024 Gigabit Ethernet Switch Manual

STP Instance Settings

The following window displays MSTIs currently set on the Switch. To view the following table, click Configuration >

Spanning Tree > STP Instance Settings:

Figure 7- 24. STP Instance Settings window

The following information is displayed:

Parameter Description

Instance Type

Displays the instance type(s) currently configured on the Switch. Each instance type is

classified by an MSTI ID. CIST refers to the default MSTI configuration set on the Switch.

Instance Status

Displays the current status of the corresponding MSTI ID.

Instance Priority

Displays the priority of the corresponding MSTI Instance Type. The lowest priority will be the

root bridge.

Priority Click the Modify button to change the priority of the MSTI. This will open the Instance ID

Settings window to configure. The Type field in this window will be permanently set to Set

Priority Only. Enter the new priority in the Priority field and click Apply to implement the new

priority setting.

Click Apply to implement changes made.

Clicking the hyperlinked name will allow the user to view the current parameters set for the MSTI Instance.

Figure 7- 25. STP Instance Operational Status window – CIST