Systems Switch User Manual

DGS-3024 Gigabit Ethernet Switch Manual
MST Configuration Table
The following windows allow the user to configure a MSTI instance on the Switch. These settings will uniquely identify a
multiple spanning tree instance set on the Switch. The Switch initially possesses one CIST or Common Internal Spanning Tree of
which the user may modify the parameters for but cannot change the MSTI ID for, and cannot be deleted. To view the Current
MST Configuration Identification window, click Configuration > Spanning Tree > MST Configuration Table:
Figure 7- 18. Current MST Configuration Identification window
The window above contains the following information:
Parameter Description
Configuration Name
A previously configured name set on the Switch to uniquely identify the MSTI (Multiple
Spanning Tree Instance). If a configuration name is not set, this field will show the MAC
address to the device running MSTP.
Revision Level
This value, along with the Configuration Name will identify the MSTP region configured on
the Switch.
MSTI ID
This field shows the MSTI IDs currently set on the Switch. This field will always have the
CIST MSTI, which may be configured but not deleted. Clicking the hyperlinked name will
open a new window for configuring parameters associated with that particular MSTI.
VID List
This field displays the VLAN IDs associated with the specific MSTI.
To delete a previously set MSTI Instance ID, click the corresponding under the Delete heading in the Current MST
Configuration Identification window. Clicking the Add button will reveal the following window to configure:
42