Systems Switch User Manual

DGS-3024 Gigabit Ethernet Switch Manual
Leave both the User Name field and the Password field blank and click OK. This will open the Web-based user interface. The
Switch management features available in the Web-based manager are explained below.
Web-based User Interface
The user interface provides access to various Switch configuration and management windows, allows you to view performance
statistics, and permits you to graphically monitor the system status.
Areas of the User Interface
The figure below shows the user interface. The user interface is divided into three distinct areas as described in the table.
Area 2
Area 3
Area 1
Figure 6- 3. Main Web-Manager window
Area Function
Area 1
Select the folder or window to be displayed. The folder icons can be opened to display the hyper-
linked menu buttons and subfolders contained within them.
Area 2
Presents a graphical near real-time image of the front panel of the Switch. This area displays the
Switch's ports and expansion modules, showing port activity, duplex mode, or flow control,
depending on the specified mode. Various areas of the graphic can be selected for performing
management functions, including port configuration.
Area 3
Presents Switch information based on your selection and the entry of configuration data.
NOTICE: Any changes made to the Switch configuration during the
current session must be saved in the Save Configuration window
(Maintenance → Save Changes) or use the command line interface (CLI)
command save.
NOTE: Be sure to configure the user name and password in the User
Account Management window (Management → User Accounts) before
connecting the Switch to the greater network.
19