Specifications

DGS-3024 Layer 2 Switch CLI Reference Manual
show bandwidth_control
Purpose Used to display the current bandwidth control settings per port.
Syntax
show bandwidth_control {<portlist>}
Description This command will display the current bandwidth control settings per
port.
Parameters <portlist> - Specifies a port or range of ports to display for bandwidth
control.
Restrictions None.
Example usage:
To display the RX bandwidth control for port 10:
DGS-3024:4#show bandwidth_control 10
Command: show bandwidth_control 10
Bandwidth Control Table
Port RX Rate
---------- -------------------
10 no_limit
DGS-3024:4#
93