Specifications

DGS-3024 Layer 2 Switch CLI Reference Manual
DGS-3024:4#clear fdb all
Command: clear fdb all
Success.
DGS-3024:4#
show multicast_fdb
Purpose Used to display the contents of the Switch’s multicast forwarding
database.
Syntax
show mulitcast_fdb {vlan <vlan_name 32> | mac_address
<macaddr>}
Description This command is used to display the current contents of the Switch’s
multicast MAC address forwarding database.
Parameters
vlan <vlan_name 32> − The name of the VLAN on which the MAC
address resides.
mac_address <macaddr> − The MAC address that will be added to
the forwarding table.
Restrictions None.
Example usage:
To display multicast MAC address table:
DGS-3024:4#show multicast_fdb
Command: show multicast_fdb
VLAN Name : default
MAC Address : 01-00-5E-00-00-00
Egress Ports : 1-5,26
Mode : Static
Total Entries : 1
DGS-3024:4#
show fdb
Purpose Used to display the current unicast MAC address forwarding
database.
Syntax
show fdb {port <port> | vlan <vlan_name 32> | mac_address
<macaddr> | static}
Description This command will display the current contents of the Switch’s
forwarding database.
Parameters
port <port> − The port number corresponding to the MAC destination
address. The Switch will always forward traffic to the specified
device through this port.
<vlan_name 32> − The name of the VLAN on which the MAC
address resides.
<macaddr> − The MAC address that will be added to the forwarding
table.
80