Specifications

DGS-3024 Layer 2 Switch CLI Reference Manual
DGS-3024:4#show stp
Command: show stp
STP Status : Enabled
STP Version : RSTP
Max Age : 20
Hello Time : 2
Forward Delay : 15
Max Age : 20
TX Hold Count : 3
Forwarding BPDU : Enabled
Loopback Protection : Enabled
LBD Recover Time : 60
DGS-3024:4#
Status 3 : STP enabled for MSTP
DGS-3024:4#show stp
Command: show stp
STP Status : Enabled
STP Version : MSTP
Max Age : 20
Forward Delay : 15
Max Age : 20
TX Hold Count : 3
Forwarding BPDU : Enabled
Loopback Protection : Enabled
LBD Recover Time : 60
DGS-3024:4#
show stp ports
Purpose Used to display the Switch’s current instance_id configuration.
Syntax
show stp ports <portlist>
Description This command displays the STP Instance Settings and STP Instance
Operational Status currently implemented on the Switch.
Parameters <portlist> - Specify a port or range of ports to be configured.
Restrictions None.
Example usage:
To show stp ports 1 through 9 on Switch one:
73