Specifications

DGS-3024 Layer 2 Switch CLI Reference Manual
delete stp instance_id
Purpose Used to delete a STP instance ID from the Switch.
Syntax
delete stp instance_id <value 1-15>
Description This command allows the user to delete a previously configured STP
instance ID from the Switch.
Parameters <value 1-15> - Enter a value between 1 and 15 to identify the Spanning
Tree instance on the Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete STP instance ID 2 from the Switch.
DGS-3024:4#delete stp instance_id 2
Command: delete stp instance_id 2
Success.
DGS-3024:4#
config stp priority
Purpose Used to update the STP instance configuration.
Syntax
config stp priority <value 0-61440> instance_id <value 0-15>
Description This command is used to update the STP instance configuration settings
on the Switch. The MSTP will utilize the priority in selecting the root
bridge, root port and designated port. Assigning higher priorities to STP
regions will instruct the Switch to give precedence to the selected
instance_id for forwarding packets. The lower the priority value set, the
higher the priority.
Parameters priority <value 0-61440> - Select a value between 0 and 61440 to
specify the priority for a specified instance ID for forwarding packets.
The lower the value, the higher the priority. This entry must be divisible
by 4096.
instance_id <value 0-15> - Enter the value corresponding to the
previously configured instance ID of which to set the priority value. An
instance id of 0 denotes the default instance_id (CIST) internally set on
the Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To set the priority value for instance_id 2 as 4096:
DGS-3024:4#config stp priority 4096 instance_id 2
Command : config stp priority 4096 instance_id 2
Success.
DGS-3024:4#
70