Specifications

DGS-3024 Layer 2 Switch CLI Reference Manual
DGS-3024:4#config mac_notification ports 7 enable
Command: config mac_notification ports 7 enable
Success.
DGS-3024:4#
show mac_notification
Purpose Used to display the Switch’s MAC address table notification global
settings.
Syntax
show mac_notification
Description This command is used to display the Switch’s MAC address table
notification global settings.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To view the Switch’s MAC address table notification global settings:
DGS-3024:4#show mac_notification
Command: show mac_notification
Global Mac Notification Settings
State : Enabled
Interval : 1
History Size : 1
DGS-3024:4#
show mac_notification ports
Purpose Used to display the Switch’s MAC address table notification status
settings.
Syntax
show mac_notification ports <portlist>
Description This command is used to display the Switch’s MAC address table
notification status settings.
Parameters <portlist> - Specify a port or group of ports to be viewed.
Entering this command without the parameter will display the MAC
notification table for all ports.
Restrictions None
Example usage:
To display all port’s MAC address table notification status settings:
48