Specifications

DGS-3024 Layer 2 Switch CLI Reference Manual
create snmp group
request SNMP messages.



<view_name 32> − An alphanumeric string of up to 32
characters that is used to identify the group of MIB objects,
which a remote SNMP manager is allowed to access on the
Switch.
write_view – Specifies that the SNMP group being created has write
privileges.
<view_name 32> − An alphanumeric string of up to 32
characters that is used to identify the group of MIB objects,
which a remote SNMP manager is allowed to access on the
Switch.
notify_view − Specifies that the SNMP group being created, can
receive SNMP trap messages generated by the Switch’s SNMP
agent.
<view_name 32> − An alphanumeric string of up to 32
characters that is used to identify the group of MIB objects,
which a remote SNMP manager is allowed to access on the
Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create an SNMP group named “sg1:”
DGS-3024:4#create snmp group sg1 v3 noauth_nopriv read_view
v1 write_view v1 notify_view v1
Command: create snmp group sg1 v3 noauth_nopriv read_view v1
write_view v1 notify_view v1
Success.
DGS-3024:4#
delete snmp group
Purpose Used to remove an SNMP group from the Switch.
Syntax
delete snmp group <groupname 32>
Description
The delete snmp group command is used to remove an SNMP
group from the Switch.
Parameters
<groupname 32> − An alphanumeric name of up to 32 characters
that will identify the SNMP group associated with the new SNMP
user.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the SNMP group named “sg1”.
34