Specifications

DGS-3024 Layer 2 Switch CLI Reference Manual
DGS-3024:4#show snmp user
Command: show snmp user
Username Group Name SNMP Version Auth-Protocol PrivProtocol
--------------- --------------- ------------ ------------- ------------
initial initial V3 None None
Total Entries: 1
DGS-3024:4#
create snmp view
Purpose Used to assign views to community strings, to limit which MIB
objects and SNMP manager has access.
Syntax
create snmp view <view_name 32> <oid> view_type [included |
excluded]
Description
The create snmp view command assigns views to community
strings, to limit which MIB objects and SNMP manager has access.
Parameters
<view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view that will be created.
<oid> − The object ID that identifies an object tree (MIB tree), which
will be included or excluded from access by an SNMP manager.
view type – Sets the view type to be:


included − Include this object in the list of objects that an
SNMP manager can access.
excluded − Exclude this object from the list of objects that an
SNMP manager can access.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create an SNMP view:
DGS-3024:4#create snmp view dlinkview 1.3.6 view_type included
Command: create snmp view dlinkview 1.3.6 view_type included
Success.
DGS-3024:4#
28