Specifications

DGS-3024 Layer 2 Switch CLI Reference Manual

DGS-3024:4#config greeting_message

Command: config greeting_message

================================================================================

Greeting Messages Editor

DGS-3024 Gigabit Ethernet Switch

Command Line Interface

Firmware: Build 4.00-B04

================================================================================

Ctrl+C Quit without save left/right/

Ctrl+W Save and quit up/down Move cursor

Ctrl+D Delete line

Ctrl+X Erase all setting

Ctrl+L Reload original setting

--------------------------------------------------------------------------------

show greeting_message

Purpose Used to view the currently configured greeting message configured

on the Switch.

Syntax

show greeting_message

Description This command is used to view the currently configured greeting

message on the Switch.

Parameters None.

Restrictions None.

Example usage:

To view the currently configured greeting message:

DGS-3024:4#show greeting_message

Command: show greeting_message

=========================================================================

DGS-3024 Gigabit Ethernet Switch

DGS-3024:4#

Command Line Interface

Firmware: Build 4.00-B04

=========================================================================

179