Specifications

DGS-3024 Layer 2 Switch CLI Reference Manual
DGS-3024:4#config authen server_group group_1 add server_host
10.1.1.121 protocol tacacs+
Command: config authen server_group group_1 add server_host
10.1.1.121 protocol tacacs+
Success.
DGS-3024:4#
delete authen server_group
Purpose Used to delete a user-defined authentication server group.
Syntax
delete authen server_group <string 15>
Description This command will delete an authentication server group.
Parameters <string 15> - Enter an alphanumeric string of up to 15 characters to
define the previously created server group to delete.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the server group “group_1”:
DGS-3024:4#delete server_group group_1
Command: delete server_group group_1
Success.
DGS-3024:4#
show authen server_group
Purpose Used to view authentication server groups on the Switch.
Syntax
show authen server_group <string 15>
Description This command will display authentication server groups currently
configured on the Switch.
This command will display the following fields:
Group Name: The name of the server group currently configured on
the Switch, including built in groups and user defined groups.
IP Address: The IP address of the server host.
Protocol: The authentication protocol used by the server host.
Parameters <string 15> - Enter an alphanumeric string of up to 15 characters to
define the previously created server group to view.
Entering this command without the <string> parameter will display all
authentication server groups on the Switch.
Restrictions None.
Example Usage:
To display the authen server groups currently on the Switch:
145