Specifications

DGS-3024 Layer 2 Switch CLI Reference Manual
show authen server_host
include tacacs, xtacacs, tacacs+ and radius.
Port – The virtual port number on the server host. The default value is
49.
Timeout - The time in seconds the Switch will wait for the server host
to reply to an authentication request.
Retransmit - The value in the retransmit field denotes how many
times the device will resend an authentication request when the
TACACS server does not respond. This field is inoperable for the
tacacs+ protocol.
Key - Authentication key to be shared with a configured TACACS+
server only.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To view authentication server hosts currently set on the Switch:
DGS-3024:4#show authen server_host
Command: show authen server_host
IP Address Protocol Port Timeout Retransmit Key
--------------- -------- ----- ------- --------------- --------
10.53.13.94 TACACS 49 5 2 --------
Total Entries : 1
DGS-3024:4#
create authen server_group
Purpose Used to create a user-defined authentication server group.
Syntax
create authen server_group <string 15>
This command will create an authentication server group. A server
group is a technique used to group TACACS/XTACACS/TACACS+
and RADIUS server hosts into user defined categories for
authentication using method lists. The user may add up to eight (8)
authentication server hosts to this group using the config authen
server_group command.
<string 15> - Enter an alphanumeric string of up to 15 characters to
define the newly created server group.
Only administrator-level users can issue this command.
Description
Parameters
Restrictions
Example usage:
To create the server group “group_1”:
DGS-3024:4#create authen server_group group_1
Command: create authen server_group group_1
Success.
DGS-3024:4#
143