Specifications

DGS-3024 Layer 2 Switch CLI Reference Manual
DGS-3024:4#config authen server_host 10.1.1.121 protocol tacacs
port 4321 timeout 12 retransmit 4
Command: config authen server_host 10.1.1.121 protocol tacacs
port 4321 timeout 12 retransmit 4
Success.
DGS-3024:4#
delete authen server_host
Purpose Used to delete a user-defined authentication server host.
Syntax
delete authen server_host <ipaddr> protocol [tacacs | xtacacs |
tacacs+ | radius]
Description This command is used to delete a user-defined authentication
server host previously created on the Switch.
Parameters server_host <ipaddr> - The IP address of the remote server host to
delete.
protocol – The protocol used by the server host to delete. The user
may choose one of the following:
Restrictions Only administrator-level users can issue this command.
 tacacs – Enter this parameter if the server host utilizes the
TACACS protocol.
 xtacacs - Enter this parameter if the server host utilizes the
XTACACS protocol.
 tacacs+ - Enter this parameter if the server host utilizes
the TACACS+ protocol.
 radius - Enter this parameter if the server host utilizes the
RADIUS protocol.
Example usage:
To delete a user-defined TACACS+ authentication server host:
DGS-3024:4#delete authen server_host 10.1.1.121 protocol tacacs+
Command: delete authen server_host 10.1.1.121 protocol tacacs+
Success.
DGS-3024:4#
show authen server_host
Purpose Used to view a user-defined authentication server host.
Syntax
show authen server_host
Description This command is used to view user-defined authentication server
hosts previously created on the Switch.
The following parameters are displayed:
IP address – The IP address of the authentication server host.
Protocol – The protocol used by the server host. Possible results will
142