Specifications

DGS-3024 Layer 2 Switch CLI Reference Manual
create account
Purpose Used to create user accounts.
Syntax
create [admin | user] <username 15>
Description
The create account command is used to create user accounts that
consist of a username of 1 to 15 characters, and a password of 0 to
15 characters. Up to 8 user accounts can be created.
Parameters admin <username>
user <username>
Restrictions Only Administrator-level users can issue this command.
Usernames can be between 1 and 15 characters.
Passwords can be between 0 and 15 characters.
Example usage:
To create an administrator-level user account with the username “dlink”.
DGS-3024:4#create account admin dlink
Command: create account admin dlink
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DGS-3024:4#
config account
Purpose Used to configure user accounts.
Syntax
config account <username>
Description
The config account command configures a user account that has
been created using the create account command.
Parameters <username>
Restrictions Only Administrator-level users can issue this command.
Usernames can be between 1 and 15 characters.
Passwords can be between 0 and 15 characters.
Example usage:
To configure the user password of “dlink” account:
10