Datasheet
DGS-1510 Series
Gigabit Stackable SmartPro Switches with 10G Uplinks
Versatile Management
The DGS-1510 series provides a D-Link Network Assistant Utility and a
web-based management interface that enables administrators to remotely
control their network down to the port level. The D-Link Network Assistant
Utility easily allows customers to discover multiple D-Link SmartPro Switches
within the same L2 network segment. With this utility, users do not need to
change the IP address of their PC. It also simplies the initial setup of the
SmartPro Switches. Switches within the same L2 network segment that are
connected to the user’s PC are displayed on screen for instant access. This
allows extensive switch conguration and basic setup of discovered devices
including password changes and rmware upgrades. The DGS-1510 series also
supports D-View 6.0 and Full features Command Line Interface (CLI) through
console port. D-View 6.0 is a Network Management System that allows for
the central management of critical network characteristics such as availability,
reliability, resilience, and security. CLI management of the switches is possible
via console port and Telnet interfaces. This makes it possible to adjust basic
settings, passwords, conguration les, and rmware with ease.
Layer 3 Trac Management
The DGS-1510 Series provides static route, allowing you to segment your
network into workgroups and communicate across VLANs without degrading
application performance. With these capabilities, you can boost the eciency
of your network by ooading internal trac-handling tasks from your router
and allowing it to manage external trac and security.
IPv6 Ready
The DGS-1510 Series is IPv6 ready and supports various IPv6 functions such
as MLD Snooping, IPv6 ACL/QoS, and IMPBv6 to ensure seamless integration
of next generation networks. The DGS-1510 Series also supports a IPv4/v6
dual stack function that allows the switch to act as a bridge between IPv4 and
IPv6 networks. Finally, all DGS-1510 Series are certied to be IPv6 Ready Logo
Phase 2, which guarantees interoperability for IPv6 environments.
Energy Saving
DGS-1510 switches are capable of conserving power without sacricing
operational performance or functionality by using D-Link Green 3.0
technology. Using the 802.3az Energy Ecient Ethernet standard, the network
will automatically decrease the power usage when trac is low with no
conguration required. For environments not fully supporting the standard,
DGS-1510 switches oer advanced power-saving settings including port
shuto, LED shuto, and system hibernation based on custom scheduling
proles. The proles can also be applied to the PoE switch so that there is no
unnecessary power consumption during o hours.
DGS-1510-20
DGS-1510-28
DGS-1510-28P
DGS-1510-52