User`s guide

Figure 17. Port Setting

Note 1: Be sure to reset the Gigabit port when transferring the media type (Fiber to Copper

or Copper to Fiber).

Note 2: The priority of Gigabit Fiber port is higher than Copper.

To change the port setting, click on the ID parameter to enter the selected port

to configure its Speed/Disable, Flow control, and QoS setting.

Figure 18

Speed/Disable:

This setting has six modes—100M Full, 100M Half, 10M Full, 10M Half,

Auto and Disable—for speed or port disable selections.