User manual

4 Configuration DGS-1210 series Metro Ethernet Managed Switch User Manual
Figure 4.154 – Monitoring > Memory Utilization
The information is described as follows:
Time Interval: Select the desired setting between 1s and 60s, where "s" stands for seconds. The default
value is one second.
Record Number: Select number of times the Switch will be polled between 20 and 200. The default value is
200.
Show/Hide: Check whether to display Five Secs, One Min, and/or Five Mins.
Clear: Clicking this button clears all statistics counters on this window.
Monitoring > Port Utilization
The Port Utilization page displays the percentage of the total available bandwidth being used on the port.
Figure 4.155 – Monitoring > Port Utilization
The user may use the real-time graphic of the Switch at the top of the web page to view utilization statistics
per port by clicking on a port. Click Apply to implement changes made. The following field can be set:
Time Interval: Select the desired setting between 1s and 60s, where "s" stands for seconds. The default
value is one second.
8
8
9
9