User manual

4 Configuration DGS-1210 series Metro Ethernet Managed Switch User Manual
State: Use the drop-down menu to select All, Address, Static or Dynamic. When the user selects address
from the drop-down menu, the user will be able to enter an IP address in the space provided next to the state
option.
Click Find to locate a specific entry based on the information entered.
Click Clear to clear all the information entered in the fields.
System > DHCP Auto Configuration
This page allows you to enable the DHCP Auto Configuration feature on the Switch. When enabled, the
Switch becomes a DHCP client and gets the configuration file from a TFTP server automatically on next boot
up. To accomplish this, the DHCP server must deliver the TFTP server IP address and configuration file
name information in the DHCP reply packet. The TFTP server must be up and running and store the
necessary configuration file in its base directory when the request is received from the Switch.
Figure 4.18 – System > DHCP Auto Configuration
System > Trap Settings
The Trap Settings page allows user the set the difference status of SNMP notifications trapped to the
Smartconsole. By default, Trap Setting is disabled.
Figure 4.19 – System > Trap Settings
You can select which event message(s) to be sent to the managing station.
Destination IP: Specifies the destination IP.
System Event: Specifies the device to send bootup notifications.
Fiber Port Event: Events when fiber port connection port link up / link down.
Twisted Pair Port Event: Events when pair port connection port link up / link down.
RSTP Port State Change: Events of a RSTP port state changes.
16