Specifications

CONFIGURATION

Through the Web Browser you can configure the Switch such as

VLAN, Trunking, QoS… etc.

Using the Switch’s Web Management Utility, you can easily discover

all the D-Link Web-Smart Switches in your network, assign the IP

Address, change the password, and upgrade new firmware.

Installing the Web Management Utility

Note: If your utility is old version, please remove it and install V1.01

or above.

The following gives instructions guiding you through the installations

of the Web Management utility.

1. Insert the Utility CD in the CD-Rom Drive.

2. From the Start menu on the Windows desktop, choose Run.

3. In the Run dialog box, type D:\Web Management

Utility\setup.exe (D:\ depends where your CD-Rom drive is

located) and click OK.

4. Follow the on-screen instructions to install the utility.

5. Upon completion, go to Program Files ->

web_management_utility and execute the Web Management

utility. (Figure 7.)