User manual

6 Command Line Interface D-Link Web Smart Switch User Manual
Syntax
show ipif
Example
DGS-1210-48> show ipif
IP Setting Mode : Static
IP Address : 172.17.5.214
Subnet Mask : 255.255.255.0
Default Gateway : 172.17.5.254
DGS-1210-48>
Figure 121 – The show ipif Command
Show switch
The command displays the status of the switch.
Syntax
show switch
Example
DGS-1210-48> show switch
System name :
System Contact :
System Location :
System up time : 0 days, 6 hrs, 32 min, 17 secs
System Time : 01/01/2009 06:32:19
System hardware version : A1
System firmware version : 1.00.001
System boot version : 1.00.000
System Protocol version : 2.001.004
System serial number : 1MB1733K0000A
MAC Address : 00-18-E7-48-85-50
DGS-1210-48>
Figure 122 – The show switch Command
Config account admin password
The command sets the administrator password.
Syntax
config account admin password <passwd>
Parameter
Parameter Description
<passwd>
The new password of the administrator.
Save
The command saves the configuration changes to the memory.
Syntax
save
Example
DGS-1210-48> save
Building configuration ...
7
7
1
1