Spec Sheet

b u s i n e s s
DGS-1210 Series
Technical Specications
DGS-1210-10P DGS-1210-16 DGS-1210-24 DGS-1210-48
Number of Ports
• 8 PoE 10/100/1000 Mbps
• 2 combo
10/100/1000BASE-T/SFP
• 12 10/100/1000Mbps
• 4 combo
10/100/1000BASE-T/SFP
• 20 10/100/1000Mbps
• 4 combo
10/100/1000BASE-T/SFP
• 44 10/100/1000 Mbps
• 4 combo
10/100/1000BASE-T/SFP
Network Cables
• UTP Cat.5, Cat.5e (100m max)
• EIA/TIA-568 100-ohm STP (100m max)
Full/Half Duplex
• Full/half duplex for 10/100Mbps speeds
• Full duplex for Gigabit speed
Media Interface Exchange
• Auto MDI/MDI-X adjustment for all twisted-pair ports
Port Standards & Functions
• IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
• IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
• IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper)
• Auto-negotiation
• IEEE 802.3x Flow Control
Web Smart 10/16/24/48-Port Gigabit Switches
VLAN technology enhances the VoIP service by
automatically placing voice trac from an IP phone
to an assigned VLAN. With higher priority and
individual VLAN, these features guarantee the quality
and security of VoIP trac. Furthermore, the DSCP
markings on Ethernet packets enable dierent levels
of service to be assigned to network trac. As a result,
these voice and video packets take precedence over
other packets. In addition, with Bandwidth Control,
network administrators can reserve bandwidth for
important functions that require a larger bandwidth or
might have higher priority.
Secure Your Network
The innovative D-Link Safeguard Engine function
protects the switches against trac ooding caused
by virus attacks. The switches can also support 802.1X
port-based authentication, allowing the network to
be authenticated through external RADIUS servers.
In addition, the Access Control List (ACL) feature
enhances network security and helps to protect the
internal IT network. The DGS-1210 Series includes ARP
Spoong Prevention, which protects from attacks
on the Ethernet network that may allow an intruder
to sni data frames on a LAN, modify trac, or bring
trac to a halt altogether by sending fake ARP
messages to the network. To prevent ARP Spoong
attacks, the switch uses Packet Control ACLs to block
invalid packets that contain fake ARP messages. For
added security, the DHCP Server Screening feature
screens rogue DHCP server packets from user ports to
prevent unauthorized IP assignment.
Versatile Management
The DGS-1210 series provides a SmartConsole Utility
and a web-based management interface that enable
administrators to remotely control their network
down to the port level. SmartConsole easily allows
customers to discover multiple D-Link Web Smart
Switches within the same L2 network segment.
With this utility, users do not need to change the IP
address of their PC. This also provides easy initial setting
of the Smart Switches within the same L2 network
segment that are connected to the user’s PC that
are displayed on screen for instant access. This
allows extensive switch conguration settings and
basic conguration of discovered devices such as
password changes and rmware upgrades. The DGS-
1210 Series also supports D-View 6.0 and Compact
Command Line Interface (CLI) through Telnet. D-View
6.0 is a Network Management System that allows
for the central management of critical network
characteristics such as availability, reliability, resilience,
and security in a consistent way. CLI management
through Telnet makes the adjustment of basic
settings such as password changes or rmware and
conguration le uploads possible.
Advanced Features
• Auto Surveillance VLAN
• Loopback Detection auto disables
port when loop is detected
• Cable Diagnostics allows
administrator to determine cable
status
• Combined copper/SFP ports for
increased exibility
• Congurable MDI/MDI-X
• LLDP/LLDP-MED (DGS-1210-10P only)
Trap & Logs
• SNMP Trap supports link and STP
state change
• Trap for SmartConsole
Online Help
• Link to local support web site
• Downloadable user guide