Datasheet
DGS-1210 Series Metro Ethernet Switches
Ecient and Resilient Networking
The DGS-1210 Series supports up to 6 kV surge protection on all Ethernet
ports, protecting the switch from the damage caused by power surges due
to lightning strikes or faulty electrical cabling. The switches also support
802.3ad Link Aggregation, which allows grouping of multiple ports to provide
redundancy and load balancing in mission-critical environments. Combined,
the two features ensures the reliability of data transmission in your network.
Security & Authentication
The DGS-1210 Series supports Auto Voice VLAN and Auto Surveillance VLAN
Mode, which allows voice and video trac to be automatically identied and
handled dierently than regular network trac. Auto Voice VLAN detects
Voice over IP (VoIP) trac and automatically segments it from the rest of the
network, adding a layer of isolation and allowing Quality of Service (QoS) to
be applied. Surveillance Mode detects compatible ONVIF cameras and places
them in a surveillance VLAN, allowing a single switch to be used for voice,
video, and data, removing the need for dedicated hardware and reducing
maintenance costs. Surveillance Mode also includes its own Web UI, making
surveillance features easily accessible and simplifying management of your
surveillance network.
Advanced Access Control
D-Link’s innovative Safeguard Engine helps to protect the switches against
trac ooding caused by malicious attacks. DGS-1210 Series supports
802.1X port-based authentication, allowing the clients to be authenticated
through external RADIUS servers. The Access Control List (ACL) feature helps
to enhance network security and helps to protect the internal IT network. To
help prevent ARP spoong attacks, the switch uses packet control ACLs to
block invalid packets that contain fake ARP messages.
Versatile Management
The DGS-1210 Series comes with the D-Link Network Assistant (DNA) utility
that enables administrators to remotely control their network down to the
port level. The D-Link Network Assistant utility furthermore allows customers
to easily discover multiple D-Link Smart Managed Switches within the same
L2 network segment and display them on-screen for instant access. With this
utility, users do not need to change the IP address of their PC. This allows
for simultaneous conguration and setup of all discovered devices, including
password changes and rmware upgrades. The DGS-1210 Series also
supports Command Line Interface (CLI) through Telnet or SSH.