User Manual

D-Link EasySmart Switch User Manual

Figure 56 – VLAN >Port-Based VLAN Settings

Add VLAN: Click to create a new VLAN name and to select VLAN ports. The VLAN name should be less

than 10 characters. To save the members in a group, click Apply.

Rename: Click to rename the VLAN group.

Delete VID: Click to delete the VLAN group.

NOTE: When Port-Based VLAN is enabled, the

802.1Q VLAN settings and 802.1Q management

VLAN settings will be set to Disabled as default.

By default, all ports are untagged.

VLAN > Surveillance VLAN

Surveillance VLAN is a feature that allows you to automatically place the video traffic from D-Link IP cameras

to an assigned VLAN to enhance the IP surveillance service. With a higher priority and individual VLAN,

the quality and the security of surveillance traffic are guaranteed. The Surveillance VLAN function

will check the source MAC address / VLAN ID on the incoming packets. If it matches specified MAC

address / VLAN ID, the packets will pass through switch with desired priority.