Datasheet
DGS-1100 Series Gigabit Ethernet Switches
Auto Surveillance VLAN and Bandwidth Control
The DGS-1100 Series supports Surveillance VLAN for IP surveillance
deployments. This gives video trac a dedicated VLAN and higher priority
through the switch, separating surveillance trac from the rest of the network.
This ensures security and guarantees the quality of the video trac, sparing
businesses the added cost of dedicated surveillance hardware. Bandwidth
Control can reserve bandwidth on a per port basis for important functions
that require larger bandwidth or might have high priority.
Advanced Features
The DGS-1100 Series is equipped with advanced security features such as
Static MAC, Storm Control, and IGMP Snooping. Static MAC allows users to
create a MAC whitelist for specic ports, helping administrators limit network
access to authorized devices only. Storm Control monitors broadcast,
multicast, or unknown unicast trac and will start blocking or discarding
packets which could ood the network when the dened threshold is
exceeded. IGMP Snooping is able to reduce the loading of L3 multicast
routers and save bandwidth in network throughput.
Easy Troubleshooting
The DGS-1100 Series features Loopback Detection and Cable Diagnostics to
help network administrators nd and solve network problems quickly and
easily. Loopback Detection is used to detect loops created by a specic port
and automatically shuts down the aected port. Cable Diagnostics helps
network administrators quickly examine the quality of the copper cables,
recognize the cable type, and detect cable errors.
PoE Support
The DGS-1100-08P/24P/10MP/10MPP/26MP/26MPP provide support for
Power over Ethernet (PoE), reducing deployment time for IP cameras, VoIP
phones, and access points. Dedicated power adapters are no longer required,
as the DGS-1100-24P/10MP/26MP comply with IEEE 802.3af and 802.3at PoE
standards and provide up to 30 watts per port. The DGS-1100-08P complies
with the 802.3af standard and provides up to 15.4 watts per port, while the
DGS-1100-10MPP/26MPP comply with 802.3af, 802.3at, 802.3bt draft and
UPoE and can supply up to 75 watts on a selected number of ports
.