User Manual

D-Link DGS-108 Unmanaged Gigabit Ethernet Switch
iv
Preface
The DGS-108 Manual is divided into sections that describe the system installation and operating instructions
with examples.
Section 1, Introduction - A description of the physical features of the Switch, including LED indicators,
ports and panel descriptions.
Section 2, Installation – A description of the physical installation of the Switch including connecting the
Switch to the network and connecting stacked switch groups.
Section 3, Connecting the Switch – A description of how to connect your Switch to an end node, hub,
switch, or backbone server.
Appendix A, Technical Specifications – The technical specifications of the DGS-108.
Glossary – Lists definitions for terms and acronyms used in this document.
Intended Readers
The DGS-108 Manual contains information for setup and management and of the DGS-108 Switch. This manual
is intended for network managers familiar with network management concepts and terminology.
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make
better use of your device.
NOTICE: A NOTICE indicates either potential damage to hardware or loss
of data and tells you how to avoid the problem.
CAUTION: A CAUTION indicates the potential for property damage,
personal injury, or death.